Get Better Indoor Signals with our Instant (no tools needed) Attic Mount with Signal Peaking Technology!
*WARNING: Indoor reception will be terrible within apartments, condos, or even homeos / attics with brick, concrete, stone/rock walls, or stucco / cement board siding or metal / aluminum siding. Additionally if there is any metal in the way such as radiant barriers or films on or beneath the attic insulation or walls or if roof flashing is in the way outdoor mounting above the roof will likely be necessary.. Reception will be terrible if mounting indoors as these materials will effectively shield out the signals. If these materials exist, outdoor mounting may likely be necessary unfortunately.
Okay, sounds like a fancy description, but that's basically what this Range Xperts HD-T200 indoor antenna tripod does. Specially designed for TV antenna mounting indoors, it's vastly superior to fixed attic mounts in both ease of install and provides vastly better TV reception results too (we'll explain how) via its signal peaking technology! It's portable so you can try it room to room before deciding on a permanent install in the attic. It requires no tools or hardware and it installs instantly! No tools, as there is no hardware to install. No drilling into your valuable home's wood and no screws, bolts, or nuts to install! Simply extend the tripods legs outward, put the outdoor antenna on the top pole of the tripod (use the antenna's mast clamp for this) and then adjust the tripod's height and direction to your needs! BETTER RECEPTION - These indoor antenna tripods are leaps and bounds superior to fixed attic mounts when it comes to reception and acquiring the absolute best signal inside the home as well! The problem with regular attic mounts that you screw down, is you have to screw it down near other materials, which add loss and can detune the antenna if they're too close. Worse yet, is they're limited in adjustment. Once you bolt/screw/nail them in, you're generally stuck in that final mounting position. Whereas our tool-less tv antena tripods, solve both of these reception performance issues. It offers substantially superior indoor reception performance. This is due to it keeps wood, nails, roof flashing, metal frames, and related materials farther away from the antenna (which reduces loss and prevents antenna detuning by objects touching or very near to the aerial). Both the height and 360 degrees of rotation can be changed on the fly and locked down any time with a single tension knob (read more about Signal Peaking below): INSTANT 3 AXIS ADJUSTMENT / SIGNAL PEAKING - However, the biggest gain in optimum reception likely comes from the simple fact that this style of indoor mounting of your outdoor antennas allows for infinite, instant adjustments on the fly of both height and direction (greatly saving time finding the sweet spot inside your home)! Thirdly, you can pick up the tripod and move it over a few feet if that mounting location isn't working out! |
SIGNAL PEAKING TECNOLOGY - you simply mount the antenna on the top pole of the tripod and just adust the height and turn the pole for maximum channel reception and watch your hardest to pick up channels start to maximize as you tune them in! With 3 ranges of movement (up/down, 360 degree rotatation, and moving the tripod to other areas of the room/attic) you're guaranteed to find the best, most optimum mounting spot in your home! When the best possible reception is found, simply lock it all down with a simple thumb knob screw with your hands (no tools needed with this mount)! No worries about this tripod moving. Once you find your spot, its robust legs hold the tripod securely in place on the floor (no installation hardware necessary). It can even hold up to 7ft TV antennas at full height, and up to 10ft antenas at a reduced height without fail or movement once locked in place!
SPECIALLY DESIGNED FOR OUTDOOR TV ANTENNAS - This may look similar to a camera tripod by the picture, however it's not even close to the same. This is tailored to handle awkward, large TV antenna loads and works universally with all outdoor antennas and antenna mast clamps (the top pole of this tripod has the same O.D. (outside diamater) as a standard TV pole mast)! The tripod is also much more heavy duty, robust and sturdy. It handles 10 times the weight and can even handle even 7ft VHF antennas rock solid at full 6ft height!
It also features an anti-tipover design with lightweight metal (aluminum) poles for the top poles and weighted steel legs at the bottom, which allows it to handles up to 7ft long antennas at FULL HEIGHT without falling over and up to 10ft long tv antennas at a reduced height.
The smallest pole (the top pole) is the same diameter as a standard TV antenna mast / pole (approx 1.2"), so it works universally with all outdoor TV antennas and their mast clamps!
Use the Check-Out button above to take advantage of this sale, and get an easier solutiong to indoor mounting of your Outdoor model and with a better indoor signal too!
- choosing a selection results in a full page refresh
- press the space key then arrow keys to make a selection